Prusa Mini FFF/FDM Printer Guide

Prusa Mini


  • Product Page - Prusa
  • Forums - Prusa
  • Manuals - Prusa
  • Official Knowledge Base MINI+ - Prusa
  • Prusa Cheat Sheet - PDF
  • Flexible steel sheets - Prusa
  • Official CAD Models (Parts) - GitHub
  • 3D Model (Assembly) - AutoDesk


Specification Value
Build Volume 180 x 180 x 180 mm
Layer height 0.05 – 0.25 mm
Nozzle 0.4 mm default, wide range of other diameters/nozzles supported
Filament diameter 1.75 mm
Supported materials Wide range of thermoplastics, including PLA, PETG, ASA, ABS, PC (Polycarbonate), CPE, PVA/BVOH, PVB, HIPS, PP (Polypropylene), Flex, nGen, Nylon, Woodfill and other filled materials.
Max travel speed 200+ mm/s
Max nozzle temperature 280 °C / 536 °F
Max heat-bed temperature 100 °C / 212 °F
Extruder Bowden system with 3:1 gearing
Print surface Removable magnetic steel sheets (*) with different surface finishes, heat-bed with cold corners compensation
Printer dimensions (without spool holder & external PSU) 4,5 kg 38×33×38 cm; 15×13×15 in (X×Y×Z)
Shipping box dimensions 11 kg (volumetric weight); 48,5×26,5×40,5 cm; 19×10×16 in (X×Y×Z)


Prusa Connect

MINI/MINI+ not yet supported
Prusa Connect does not yet support the MINI/MINI+.



  • First layer calibration - Prusa
  • Steel sheet profiles- Prusa
  • Extrusion multiplier calibration - Prusa
  • Extruder calibration -

M500 is disabled.
Prusa disabled M500, and custom firmware voids the warranty.


Surface pitting

In-layer pitting
Change retraction from 3.2mm to 2.0mm in the slicer.